Leetx PLP servo press
0.2–0.5 kN
The PLP is a servo press from Leetx, for 0.2–0.5 kN. It is used for press-fitting with force and displacement monitoring. LaXtech supplies it as a distributor and service partner, helps you choose the configuration and integrate it into your line, and supports it after the sale in your language.
Key specifications
| Peak force | 0.2–0.5 kN |
|---|---|
| Stroke | 100 mm |
| Speed | 200 mm/s |
| Form | C-frame |
| Number of models | 2 |
Models
| Model | Peak force | Stroke | Speed |
|---|---|---|---|
| PLPS.002.100.225 | 0.2 kN | 100 mm | 200 mm/s |
| PLPS.005.100.225 | 0.5 kN | 100 mm | 200 mm/s |
| MODEL | STROKE | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PLPS.002.100.225 | 100 | 203 | 138 | 45 | 3 | 8 | 20 | 52 | 65 | 57 | 4 × Ø3.4 through holes, countersunk Ø6.34 deep | na | 15 | 4 × M2.5-6 | Ø2 | 10 |
| PLPS.005.100.225 | 100 | 203 | 138 | 45 | 3 | 8 | 20 | 52 | 65 | 57 | 4 × Ø3.4 through holes, countersunk Ø6.34 deep | na | 15 | 4 × M2.5-6 | Ø2 | 10 |
| PLP | – | 2 | 100 | 200 |
|---|---|---|---|---|
| Series | Pressure Type | Pressure Range | Operating Speed | Maximum Speed |
| PLPS | Direct connection | 200 N | 100 mm | 200 mm/s |
| 500 N | 200 mm |
Applications and limits
[Applications and limits, written by a LaXtech engineer]
What LaXtech provides
[To confirm for this product: selection, trial, installation, calibration, repair, spares]
Documents
[Documents, once republishing rights are confirmed]
[Unverified data, read from the old page https://laxtech.eu/en/plp-series-precision-servo-presses/ on 2026-11-01. An engineer must check it against manufacturer documents.]
Ask about PLP
Your enquiry reaches us with the product, the page and your language.