Leetx PCS servo press
5–300 kN
The PCS is a servo press from Leetx, for 5–300 kN. It is used for press-fitting with force and displacement monitoring. LaXtech supplies it as a distributor and service partner, helps you choose the configuration and integrate it into your line, and supports it after the sale in your language.
Key specifications
| Peak force | 5–300 kN |
|---|---|
| Stroke | 100–400 mm |
| Speed | 80–250 mm/s |
| Form | Workstation |
| Number of models | 8 |
Models
| Model | Peak force | Stroke | Speed |
|---|---|---|---|
| PCS.005 | 5 kN | 100–400 mm | 250 mm/s |
| PCS.015 | 15 kN | 100–400 mm | 250 mm/s |
| PCS.030 | 30 kN | 100–400 mm | 250 mm/s |
| PCS.060 | 60 kN | 100–400 mm | 250 mm/s |
| PCS.100 | 100 kN | 100–400 mm | 150 mm/s |
| PCS.150 | 150 kN | 100–400 mm | 80 mm/s |
| PCS.200 | 200 kN | 100–400 mm | 80 mm/s |
| PCS.300 | 300 kN | 100–400 mm | 80 mm/s |
[Dimension drawing and table, once rights and values are confirmed]
Applications and limits
[Applications and limits, written by a LaXtech engineer]
What LaXtech provides
[To confirm for this product: selection, trial, installation, calibration, repair, spares]
Documents
[Documents, once republishing rights are confirmed]
[Unverified data, read from the old page https://laxtech.eu/en/products/servo-presses/pcs-series-servo-presses/ on 2026-11-01. An engineer must check it against manufacturer documents.]
Ask about PCS
Your enquiry reaches us with the product, the page and your language.