Rivit RIV920 and RIV930 hydropneumatic tools for rivet nuts
20.7–30.6 kN
RIV920 and RIV930 are hydropneumatic tools for rivet nuts from Rivit, rated 20.7–30.6 kN. It is used for riveting in assembly. LaXtech supplies them as a distributor and service partner, helps you choose the configuration and integrate them into your line, and supports them after the sale in your language.
Key specifications
| Force | 20.7–30.6 kN |
|---|---|
| Stroke | 8 mm |
| Weight | 1.6–1.9 kg |
| Options | Hydropneumatic |
| Options | Rivet nut |
| Number of models | 2 |
Models
| Model | Weight | Force | Stroke |
|---|---|---|---|
| RIV920 | 1.6 kg | 20.7 kN | 8 mm |
| RIV930 | 1.9 kg | 30.6 kN | 8 mm |
| air working pressure (bar) | 6,0 |
|---|---|
| min/max air pressure (bar) | 5/7 |
| max stroke (mm) | 8,0 |
| tensile stress at 6bar (N) | 20700 |
| motor speed spin on (rpm) | 3500,0 |
| motor speed spin off (rpm) | 3200,0 |
| weight without kit (kg) | 1,6 |
| noise level dB(A) | < 75,0 |
| air working pressure (bar) | 6,0 |
|---|---|
| min/max air pressure (bar) | 5/7 |
| max stroke (mm) | 8,0 |
| tensile stress at 6bar (N) | 30600 |
| motor speed spin on (rpm) | 3500,0 |
| motor speed spin off (rpm) | 3200,0 |
| weight without kit (kg) | 1,9 |
| noise level dB(A) | < 75,0 |
[Dimension drawing and table, once rights and values are confirmed]
Applications and limits
[Applications and limits, written by a LaXtech engineer]
What LaXtech provides
[To confirm for this product: selection, trial, installation, calibration, repair, spares]
Documents
- 920-6653500ItemTechCardDatasheet, 239 KB
- 930-6653600ItemTechCardDatasheet, 239 KB
- RIV920 datasheet ENDatasheet, 1891 KB
- RIV930 datasheet ENDatasheet, 1694 KB
Related products
[Unverified data, read from the old page https://laxtech.eu/en/hydropneumatic-tools-for-rivet-nuts-riv920-riv930/ on 2026-11-01. An engineer must check it against manufacturer documents.]
Ask about RIV920, RIV930
Your enquiry reaches us with the product, the page and your language.