Rivit RIV508 hydropneumatic tool for rivet nuts
21 kN
The RIV508 is a hydropneumatic tool for rivet nuts from Rivit, for 21 kN. It is used for riveting in assembly. LaXtech supplies it as a distributor and service partner, helps you choose the configuration and integrate it into your line, and supports it after the sale in your language.
Key specifications
| Force | 21 kN |
|---|---|
| Stroke | 21 mm |
| Weight | 2.35 kg |
| Options | Hydropneumatic |
| Options | Rivet nut |
Models
| Model | Weight | Force | Stroke |
|---|---|---|---|
| RIV508 | 2.35 kg | 21 kN | 21 mm |
| air working pressure (bar) | 6,0 |
|---|---|
| min/max air pressure (bar) | 5 – 7 |
| air consumption x cycle 6 bar (lt) | 4,9 |
| stroke (mm) | 21,0 |
| tensile stress at 6bar (N) | 21000 |
| weight without kit (kg) | 2,350 |
| vibrations (m/s²) | < 2,5 |
| noise level dB(A) | 78,5 |
[Dimension drawing and table, once rights and values are confirmed]
Applications and limits
[Applications and limits, written by a LaXtech engineer]
What LaXtech provides
[To confirm for this product: selection, trial, installation, calibration, repair, spares]
Documents
- 508-3008000ItemTechCardDatasheet, 368 KB
Related products
[Unverified data, read from the old page https://laxtech.eu/en/hydropneumatic-tool-for-rivet-nuts/ on 2026-11-01. An engineer must check it against manufacturer documents.]
Ask about RIV508
Your enquiry reaches us with the product, the page and your language.